*****FREE SHIPPING*****

SIMIRON MVB is a 100% solids, two-component, epoxy primer designed for concrete floors with severe moisture vapor transmission (MVT) problems. SIMIRON MVB can control emission rates up to 20lb/24hr/1000 square feet. This primer is designed to be used as a moisture vapor barrier under SIMIRON decorative floor coatings along with other flooring systems.

FEATURES & BENEFITS

• Helps reduce the effects of moisture vapor transmission
• One Coat Application
• Easy to Apply
• VOC Compliant Nationwide
• Virtually No Odor
• Exceeds the requirement for ASTM F3010, two-component resin-based membrane-forming moisture mitigation systems for use under resilient floor coverings
• LEED V4. Compliant
• Excellent adhesion to damp concrete (ASTM D7234)

RECOMMENDED USES

• Over Concrete Surfaces
• New Construction
• Decorative Chip
• Decorative Quartz
• Metallic
• High/Thin Build Systems
• Mortars
• Carpet
• Wood Floors
• Terrazzo
• Cementitious Overlays
• Vinyl Sheets
• Tiles (Ceramic, Porcelain & Stone)
• Vinyl Tile (VCT)
• Polymeric Flooring
• Other Flooring Systems

POT LIFE: 75 minutes

COVERAGE: 100sq.ft. per gallon

TINTING: Add 1 MVB Tint Pack per kit

MIXING: SIMIRON MVB is a two-component coating and proper mixing is required. Be sure to mix Base prior to use. Mix 2 parts base to 1 part activator, by volume, for three minutes. Material is immediately ready for use after mixing base and activator together; no induction time is required. Do not mix more material than can be used within the working time. Material that has begun to set (thicken) cannot be satisfactorily used and must be discarded.

APPLICATION EQUIPMENT:

• Squeegee – Flat or notched rubber squeegee with EPDM rubber blade.
• Rollers – Use a 3/8’ shed-resistant woven roller cover for back-rolling.

APPLICATION PROCEDURE: Pour mixed material onto floor in a long bead approximately 12-18 inches wide. Do not drain or scrape remaining material in bucket. Use either a flat or notched rubber squeegee and spread material to uniform thickness. As material is being spread, another applicator should immediately back-roll material with a 3/8” shed-resistant woven roller cover. DO NOT BACK-ROLL MATERIAL AFTER IT BEGINS TO TACK-UP. MVB must be applied at 16 mils or 100 sq/ft.per gallon.