Coatings Solutions Tru-Flow 100% Solids Epoxy Color Chart Tru-Flow Epoxy Part A Tru-Flow Epoxy Part B Tru-Waterbased Epoxy Primer Tr-Alpha Polyaspartic
Coating Solutions

Tru-flow 100% Solids Epoxy

$259.99

*****FREE SHIPPING*****

Tru-Flow 100 Solids Epoxy is a self-leveling two component high gloss floor coating, two parts epoxy resin to one-part epoxy hardener.  Tru-Flow 100% Solids Epoxy is an incredible durable and easy to use epoxy designed to protect and beautify floors in residential and commercial spaces including garage floors, retails floors, shop and warehouse floors, schools and universities, restaurants, and so much more. 

  • Self-Leveling
  • Gloss finish
  • Low odor
  • Easy to use
  • 30-45 minute working time
  • High strength, excellent durability
  • Unbelievable adhesion

SurfacePrep&Priming: Grind concrete floors to CSP-3, vacuum dust, wipe with Denatured alcohol. Apply one coat of Tru-Waterbased Epoxy Primer at 250 sq.ft. per gallon (See product label for further instruction) allow to dry 16 hours.  

Mixing: Add Part B to Part A Mix for 2 minutes with mechanical mixing. Wearing spike shoes immediately pour mixed material on the floor.

Application: Pour mixed material on the floor in 12” ribbons. While wearing spiked shoes back roll with lint-free 3/16” epoxy roller. If Metallic application, do not back roll move material using magic trowel. Add second color or spritz alcohol for moon-rock effects.

Coverage:

  • 1 gallon will cover approximately 
  • Primer on Porous Concrete 150-200 sq.ft./gal. Pigmented receiver coat for vinyl chips 160-180 sq.ft./gal Metallic Floors 55-65 sq.ft./gal
  • Clear Finish Coat on flake floors 150-180 sq.ft./gal.

Best if applied at temperatures between 55-90 degrees Fahrenheit.

Broadcasting Vinyl Chips: Apply pigmented epoxy basecoat at 180 sq.ft. per gallon. After epoxy is spread and back rolled divide chips in equal portions then throw vinyl chips upwards let them drop in the wet epoxy. Let cure 24hrs. Then scrap and vacuum up loose flakes. After scrapping and vacuuming several times. Apply coat of Tru-Alpha Polyaspartic Clear Finish coat using a magic trowel pull seal coat across the flake at 180 sq. ft per gallon. Tru-Alpha Water-based Urethane Gloss or Matte also great option for interior applications or low odor is a requirement.

Metallic Pigments: While mixing add one metallic pigment to one gallon of Tru-Flow Resin. Mix at low speed or two minutes. For best results let this mixture sit so powder can fully wet out. Then add Epoxy Hardener mix for additional 2 minutes continually sweeping sides and bottom of container.

Dry time & Recoat:

  • Tack free/foot traffic: 6-8 hrs. Heavy foot traffic 48 hrs.
  • Recoat 12-24 hrs. Vehicular Traffic 3 days.
  • Lightly sand the surface and wipe down with denatured alcohol or acetone before applying additional coats or finish coats.

Exterior Applications: Unless installed as a primer with pigmented Urethane Topcoats. Not recommended as clear epoxy will amber.

Full Description
Options *
Qty
  • Description

    *****FREE SHIPPING*****

    Tru-Flow 100 Solids Epoxy is a self-leveling two component high gloss floor coating, two parts epoxy resin to one-part epoxy hardener.  Tru-Flow 100% Solids Epoxy is an incredible durable and easy to use epoxy designed to protect and beautify floors in residential and commercial spaces including garage floors, retails floors, shop and warehouse floors, schools and universities, restaurants, and so much more. 

    • Self-Leveling
    • Gloss finish
    • Low odor
    • Easy to use
    • 30-45 minute working time
    • High strength, excellent durability
    • Unbelievable adhesion

    SurfacePrep&Priming: Grind concrete floors to CSP-3, vacuum dust, wipe with Denatured alcohol. Apply one coat of Tru-Waterbased Epoxy Primer at 250 sq.ft. per gallon (See product label for further instruction) allow to dry 16 hours.  

    Mixing: Add Part B to Part A Mix for 2 minutes with mechanical mixing. Wearing spike shoes immediately pour mixed material on the floor.

    Application: Pour mixed material on the floor in 12” ribbons. While wearing spiked shoes back roll with lint-free 3/16” epoxy roller. If Metallic application, do not back roll move material using magic trowel. Add second color or spritz alcohol for moon-rock effects.

    Coverage:

    • 1 gallon will cover approximately 
    • Primer on Porous Concrete 150-200 sq.ft./gal. Pigmented receiver coat for vinyl chips 160-180 sq.ft./gal Metallic Floors 55-65 sq.ft./gal
    • Clear Finish Coat on flake floors 150-180 sq.ft./gal.

    Best if applied at temperatures between 55-90 degrees Fahrenheit.

    Broadcasting Vinyl Chips: Apply pigmented epoxy basecoat at 180 sq.ft. per gallon. After epoxy is spread and back rolled divide chips in equal portions then throw vinyl chips upwards let them drop in the wet epoxy. Let cure 24hrs. Then scrap and vacuum up loose flakes. After scrapping and vacuuming several times. Apply coat of Tru-Alpha Polyaspartic Clear Finish coat using a magic trowel pull seal coat across the flake at 180 sq. ft per gallon. Tru-Alpha Water-based Urethane Gloss or Matte also great option for interior applications or low odor is a requirement.

    Metallic Pigments: While mixing add one metallic pigment to one gallon of Tru-Flow Resin. Mix at low speed or two minutes. For best results let this mixture sit so powder can fully wet out. Then add Epoxy Hardener mix for additional 2 minutes continually sweeping sides and bottom of container.

    Dry time & Recoat:

    • Tack free/foot traffic: 6-8 hrs. Heavy foot traffic 48 hrs.
    • Recoat 12-24 hrs. Vehicular Traffic 3 days.
    • Lightly sand the surface and wipe down with denatured alcohol or acetone before applying additional coats or finish coats.

    Exterior Applications: Unless installed as a primer with pigmented Urethane Topcoats. Not recommended as clear epoxy will amber.

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: 210-CLR-03
    Weight: 32.00 LBS