Product Overview

*****FREE SHIPPING*****

Benjamin Moore Regal Select Interior Paint is the brand’s flagship premium interior coating, known for its flawless application, exceptional durability, and rich, even finish. Now updated with new product codes (N547–N551), Regal Select continues to deliver the professional-grade performance painters trust, with superior hide, stain resistance, and easy touch-up across all sheen levels.

Formulated with Benjamin Moore’s exclusive Gennex® Color Technology, Regal Select resists fading and delivers beautiful, true-to-chip color. Its low-VOC, low-odor formula makes it an excellent choice for any interior space—from residential rooms to commercial interiors.

AVAILABLE SHEENS:

Flat (N547) – Ultra-smooth, non-reflective finish; ideal for ceilings and low-traffic areas
Matte (N548) – Subtle sheen with better washability; great for living rooms and bedrooms
Eggshell (N549) – Soft, velvety finish; perfect balance of elegance and cleanability
Satin/Pearl (N550) – Medium sheen with enhanced durability; great for kitchens and bathrooms
Semi-Gloss (N551) – Reflective, tough finish; ideal for trim, doors, and high-traffic areas

KEY FEATURES:

Formerly product codes 574, 548, 549, 550, 551
Excellent stain resistance, washability, and touch-up
Proprietary Gennex® Color Technology for lasting color and performance
Spatter-resistant application with excellent flow and leveling
Low odor and low VOC
Available in thousands of colors

RECOMMENDED USES:

Walls, ceilings, trim, doors
Living rooms, bedrooms, kitchens, bathrooms
Commercial interiors and residential applications
New construction or repaint projects

COVERAGE: 400-450 sq.ft. per gallon

DRY TIMES:

N547, N548, N549, & N550

To touch: 1 hour
Recoat: 1-2 hours

N551

To touch: 1 hour
Recoat: 3 hours

COLORS: White and almost unlimited custom colors.

COMPLIANCE & CERTIFICATIONS:

OTC
OTC II
CARB
CARB07
CARB19
UTAH
AZMC
SCAQMD
Eligible for LEED® v4
CDPH Emissions Certified
Eligible for CHPS low emitting credit (Collaborative for High Performance Schools)
Benjamin Moore’s Green Promise
MPI

N547: 142, 143
N548: 142, 143
N549: 138
N550: 140
N551: 54, 141, 147

MPIx

N547: 142, 143
N548: 142, 143
N549: 138
N551: 54, 141, 147

Class A (0-25) over non-combustible surfaces when tested in accordance with ASTM E-84
Anti-microbial - This product contains agents which inhibit the growth of microbes on the surface of this paint film. This product contains antimicrobial additives that inhibit the growth of mold and mildew on the surface of the paint film.
This Benjamin Moore® product has been tested by independent third parties and meets or exceeds the published chemical restriction and performance criteria of the Green Seal™ GS-11 2015 standard.

SURFACE PREPARATION: Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust.

New plaster or masonry surfaces must be allowed to cure (30 days) before applying base coat. Cured plaster should be hard, have a slight sheen and maximum pH of 10; soft, porous or powdery plaster indicates improper cure. Never sand a plaster surface; knife off any protrusions and prime plaster before and after applying patching compound. Poured or pre-cast concrete with a very smooth surface should be etched or abraded to promote adhesion after removing all form release agents and curing compounds. Remove any powder or loose particles before priming.

Difficult Substrates: Benjamin Moore offers a variety of specialty primers for use over difficult substrates such as plaster, bleeding woods, grease stains, crayon markings, hard glossy surfaces, galvanized metal or other substrates where paint adhesion or stain suppression is a particular problem. Your Benjamin Moore® retailer or architectural representative can recommend the right problem-solving primer for your special needs.

PRIMER SYSTEMS: Regal® Select is self‐priming on most properly prepared surfaces. While the high quality of our products sometimes makes one‐coat coverage achievable, Benjamin Moore® recommends two coats to achieve full color development and to optimize performance. On bare substrates, two coats are recommended; previously painted surfaces can be finished with 1 or 2 coats.

Special Note: Certain custom colors may require a Deep Base Primer tinted to a special prescription formula to achieve the desired color. Ask your retailer about our special purpose primers if the surface to be painted is water stained, smoke damaged, grease stained or very slick.

Wood, and engineered wood products: Self-priming
Bleeding Woods (Redwood, Cedar, etc.): Fresh Start® Undercoater and Primer/Sealer (032) or Fresh Start® High-Hiding All Purpose Primer (046)
Drywall: Self-priming
Plaster (Cured): Self-priming
Rough or Pitted Masonry: Ultra Spec® Masonry Interior/Exterior High Build Block Filler (571)
Smooth Poured or Pre-cast Concrete: Self-priming
Ferrous Metal (Steel and Iron): High Performance Acrylic Metal Primer (HP1100) or High Performance Alkyd Metal Primer (HP1320)
Non-Ferrous Metal (Galvanized & Aluminum): All new metal surfaces must be thoroughly cleaned with Oil & Grease Emulsifier (HP6000) to remove contaminants. New shiny non-ferrous metal surfaces that will be subject to abrasion should be dulled with very fine sandpaper or a synthetic steel wool pad to promote adhesion. High Performance Acrylic Metal Primer (HP1100)
Repaint, All Substrates: Prime bare areas with the primer recommended above for the substrate.

APPLICATION: Stir thoroughly before and during use. Apply one or two coats. For best results, use a premium nylon/polyester brush, premium roller, or a similar product. Apply paint generously from unpainted area into wet area. This product can also be sprayed.