Product Overview
*****FREE SHIPPING*****
Coronado® Rust-A-Void™ Rust Preventative Polyurethane Enamels (formerly Coronado Rust Scat, oil-based) are premium rust-inhibiting coatings designed to protect metal surfaces from corrosion while delivering a tough, long-lasting finish.
Rust-A-Void replaces the legacy Rust Scat line with improved polyurethane performance while maintaining the durability contractors relied on for years. Formulated as an alkyd urethane enamel, Rust-A-Void provides excellent adhesion, abrasion resistance, and corrosion protection for interior and exterior metal surfaces.
Available in three sheens — Satin (R651), Semi-Gloss (R13), and Gloss (R31) — Rust-A-Void allows you to match appearance and performance requirements across a wide range of applications, from architectural metal to industrial maintenance.
Key Features & Benefits:
- Formerly Coronado Rust Scat — updated formula with modern polyurethane performance
- Rust-preventative alkyd urethane enamel
- Excellent adhesion to properly prepared metal surfaces
- Abrasion-resistant, durable finish
- Interior and exterior use
- Available in Satin, Semi-Gloss, and Gloss sheens
- Ideal for maintenance, commercial, and light industrial applications
RECOMMENDED FOR: A durable rust preventive coating for metal substrates in commercial, institutional, and residential applications. For interior or exterior use on handrails, stairs, doors, piping and more.
SHEEN OPTIONS
- Satin (R651) – Low-luster finish offering durable rust protection with a softer appearance
- Semi-Gloss (R13) – Balanced sheen with improved washability and toughness
- Gloss (R31) – High-gloss finish for maximum sheen, cleanability, and visual impact
COLORS:
- Available in unlimited custom mixed colors
- Factory Pre-Mixed Colors
- Gloss: White, Battleship Gray, Safety Red, Safety Blue, Safety Orange, Safety Yellow, Black, & Silver Gray
- Semi-Gloss: White Only
- Satin: White, Black, Duronodic Bronze
COVERAGE
- All Sheens: 350 – 450 Sq. Ft.
DRY TIME:
- To touch: 2 hours
- Recoat: 12 hours
SURFACE PREPARATION: Surfaces to be painted must be clean and free from wax, oil, grease, dust, rust, loose paint, and water‐ soluble materials. All loose rust or peeling paint should be removed and glossy surfaces must be dulled before recoating.
PRIMER SYSTEMS:
- Ferrous Metal (Steel and Iron): This product can be used direct to ferrous metal surfaces. For best corrosion resistance, use a rust inhibitive metal primer.
- Non‐Ferrous Metal (Galvanized & Aluminum): Use an acrylic metal primer All new metal surfaces must be thoroughly cleaned with an oil & grease emulsifier to remove contaminants. New shiny non‐ferrous metal surfaces that will be subject to abrasion should be dulled with very fine sandpaper or a synthetic steel wool pad to promote adhesion.
APPLICATION: Stir thoroughly with a circular, lifting motion to secure even pigment dispersion. Apply paint generously from unpainted area into wet area. Avoid lap marks by maintaining a wet edge.
- Brush: Natural / China bristle
- Roller: ¼” or Mohair short nap
- Spray, Airless:
- Pressure / 1,500 – 2,500 PSI
- Tip / 0.013 – 0.017
CLEANING: Clean all equipment immediately after use with mineralspirits.
Reviews
