Woodluxe Wood Stain Remover by Benjamin Moore - GALLON

*****FREE SHIPPING*****

Woodluxe Wood Stain Remover is expertly formulated to strip away stains and finishes from your exterior wood surfaces, including decks, siding, fences, shakes, and furniture. This powerful product also removes stains from mold, mildew, algae, dirt, and water, restoring the wood to its natural tone. Whether you're dealing with latex or oil finishes, our fast-acting, concentrated formula ensures efficient and thorough removal.

Key Features:

• Removes Both Latex and Oil Finishes: Versatile solution for various wood finishes.
• Fast-Acting Formula: Quickly breaks down stains and finishes for easy removal.
• Concentrated for Maximum Efficiency: Highly effective, even on tough stains.

Ideal Usage:

• Residential Applications: Perfect for restoring home decks, siding, fences, and outdoor furniture.
• Commercial Applications: Suitable for commercial properties requiring wood stain removal.

Note: While Woodluxe Wood Stain Remover effectively removes stains from mold, mildew, fungus, and algae, it does not control these organisms.

Max Mixing Ratio (Water : Remover): 4 : 1

Coverage at Max Dilution: 500 – 1000 Sq. Ft

Compliance & Certifications

OTC 
OTC II 
CARB 
CARB07 
CARB19 
UTAH 
AZMC 
SCAQMD

Surface Preparation: Project surfaces may be damp or dry. Do not apply if surface temperature is below 50 °F (10 °C). Protect adjacent surfaces; cover with plastic and/or tape off any areas not being stripped. Pre-wet and/or cover vegetation; rinsing residue will not harm plants or roots. Exposure to concentrate may burn foliage.

PRIOR TO APPLICATION: Determine proper dilution following the chart below. Test a small, inconspicuous area and allow to dry before general use. Before and after application, liberally spray surrounding plants and vegetation with water. Avoid contact with metal, lawn furniture and fabric. If necessary protect adjacent surfaces with plastic.

Application:

Mixing Recommendations:

• Multiple Coats / Solid or Semi Solid Stain: Do not dilute
• Weathered Solid Color or Semi Solid Stain: 1 gallon water : 1 gallon remover
• Semi Transparent Stain: 2 gallons water : 1 gallon remover
• Transparent/Translucent Stain: 3 gallons water : 1 gallon remover
• Clear Finishes: 4 gallons water : 1 gallon remover

DO NOT MIX CLEANER IN METAL CONTAINERS. NEVER MIX OR USE WITH OTHER CLEANERS OR CHEMICALS.

1. Apply product liberally to surface with plastic garden sprayer, brush or roller.
2. Allow solution to stand for 10 – 30 minutes, depending upon age and type of finish to be removed.
3. Agitate with stiff bristle brush in direction of wood grain and rinse using a garden hose with nozzle or power washer.
4. Neutralize surface with Woodluxe® Wood Brightener and Neutralizer (017) following label directions.
5. Allow to dry thoroughly. Note: When applying to vertical surfaces, apply from bottom to top.

Limitations:

• Do not apply when air and surface temperatures are below 50 °F (10 °C)
• Remover (015) may darken certain wood types during application. If desired, use Wood Brightener & Neutralizer (017) to restore wood color back to its natural appearance.