Product Overview
*****FREE SHIPPING*****
Benjamin Moore HP3410 Pre-Catalyzed Waterborne Epoxy (Formerly Corotech V341) is a single-component, ready-to-use epoxy formulated for exceptional interior durability and chemical resistance. It delivers the strength of traditional epoxies with the convenience of a waterborne system — ideal for demanding commercial and industrial environments.
HP3410 cures to a scrubbable, abrasion- and mildew-resistant semi-gloss finish that withstands frequent cleaning, moisture, and wear. Its excellent adhesion and fast recoat time make it a smart choice for facility maintenance teams, contractors, and specifiers seeking high-performance coatings that meet modern environmental standards.
Key Features & Benefits
- Formerly Corotech V341 – same trusted performance under the Benjamin Moore HP series name
- Single-component epoxy – no catalyst required, ready to use
- Exceptional adhesion to primed metal, masonry, wood, and previously painted surfaces
- Resists chemicals, moisture, and abrasion for long-term durability
- Mildew-resistant film for cleaner environments
- Low-VOC and LEED® v4 eligible for sustainable projects
- Fast dry & recoat times (approx. 1 hr to touch, 2 hrs to recoat)
- Excellent coverage: approx. 350–450 sq ft per gallon (at recommended film thickness)
Recommended Uses
- Schools and educational facilities
- Hospitals, laboratories, and healthcare spaces
- Food processing plants and industrial maintenance areas
- Warehouses, corridors, and utility rooms
- Primed drywall, masonry, metal, and wood substrates
USAGE: Properly Prepared and/or Primed Steel, Iron, Concrete, Non-Ferrous Metals, Wood & Drywall. HP3410 is designed for interior use in food and beverage processing, chemical processing, transportation, warehouses, industrial refurbishment, healthcare, schools, large commercial structures and other areas where a high performance coating is needed.
COVERAGE: 350 - 450sq.ft. per gallon
DRY TIMES:
- To touch: 1 hour
- To recoat: 2 hours
SURFACE PREPARTION: Prior to painting any surface, area must be clean, dry and free of all grease, dirt, dust, oil and wax. Clean all surfaces using HP6000 Oil & Grease Emulsifier. Remove all remaining loose paint, rust and mill scale via Hand Tool Cleaning (SSPC-SP 2) or Power Tool cleaning (SSPC-SP 3). Fill holes and cracks and sand smooth. Glossy surfaces must be fully deglossed. Moderate to heavily rusted areas must be thoroughly prepared and active rust should be properly removed.
PRIMER SYSTEMS:
- Ferrous Metal: New metal surfaces should be primed with HP1320 Alkyd Metal Primer or HP1100 Acrylic Metal Primer.
- Galvanized, Aluminum and Non-Ferrous Metals: Clean oil from new galvanized metal by cleaning with HP6000 Oil & Grease Emulsifier. Prime new or unrusted metal with HP1100 Acrylic Metal Primer or HP1750 Waterborne Bonding Primer.
- Wood: Sand surfaces. Prime bare spots and new wood with an acrylic primer/sealer/undercoater. Apply one or two coats of HP3410 as needed.
- Drywall and Cured Plaster: Sand surfaces. Prime with an acrylic primer/sealer/undercoater.
- Concrete/Masonry: All vertical masonry surfaces must be allowed to cure a minimum of 30 days before painting. Acid etch or abrasive blast all slick, glazed concrete or concrete with laitance. For acid etching, follow all manufacturer’s directions and safety instructions. Smooth surfaces should be coated with a masonry sealer followed by one or two coats of HP3410 as needed. Rough surfaces can be coated with a block filler to produce a smoother finish followed by one or two coats of HP3410 finish as needed.
APPLICATION: Stir thoroughly before and during use. Apply one or two coats. For best results, use a premium nylon/polyester brush and premium roller. Apply paint generously from unpainted area into wet area. This product can also be sprayed.
- Spray, Airless: Pressure / 2,000 – 2,500
- Tip / 0.015 – 0.019
CERTIFICATIONA & COMPLIANCE
- Eligible for LEED® v4
- CDPH Emissions Certified
- Eligible for CHPS low emitting credit (Collaborative for High Performance Schools)
- MPI 153
Anti-microbial - This product contains agents which inhibit the growth of microbes on the surface of this paint film. This product contains antimicrobial additives that inhibit the growth of mould and mildew on the surface of the paint film. This product has been approved by CFIA (Canadian Food Inspection Agency) for use in Food Processing Facilities.
Reviews
