Product Overview
*****FREE SHIPPING*****
Regal Select Exterior High Build a premium quality, high build, self priming, 100% acrylic latex formula engineered for optimum hide and tinted with the Benjamin Moore proprietary Gennex colorant system. It offers a thick, high-build formula with easy application by brush or spray, this coating offers excellent flow and leveling and the superior performance you expect from the Regal name for your exterior projects. It adheres powerfully to exterior substrates and provides advanced mildew and stain resistance.
- Durable finish resists fading, cracking and peeling so your home's exterior looks freshly painted for years to come
- Excellent flow and leveling for easy application
- Mildew resistant even in humid conditions
- Low temperature application (to 40° F) extends the painting season
- Excellent hiding
- Dries quickly
- Excellent color retention
- Self priming
- Master Painters Institute
- Flat: MPI # 10
- Low Lustre: MPI # 15, 315
- Soft Gloss: MPI #11
Ideal when you need:
- Added durability, hide and coverage that only a high-build paint product delivers
- A Flat finish for a smooth, non-reflective finish that hides imperfections while delivering an ultra-smooth appearance
Recommended for: A premium exterior 100% acrylic paint recommended for wood, hardboard, fiber cement, cedar shake, vinyl and aluminum siding; unglazed brick, concrete, stucco, cinder block, and primed metal.
Coverage:
- Flat & Low Lustre: 250-350 sq.ft./gal
- Soft Gloss: 275-375 sq.ft./gal
Surface Preparation: Surfaces must be clean, dry and free of oil, grease, wax, rust, mildew, chalk and loose or scaling paint. Cement based water proofing paints should be removed. Glossy surfaces must be dulled. Un-weathered areas such as eaves, porch ceilings, overhangs and protected wall areas should be washed and rinsed with a strong stream of water from a garden hose or power washer to remove contaminants that can interfere with proper adhesion. Stains from mildew must be removed prior to coating the surface. All new masonry surfaces must be power washed or brushed thoroughly with stiff fiber bristles to remove loose particles. New masonry substrates must be allowed to cure for 30 days before priming or painting. Poured or pre-cast concrete with a very smooth surface should be etched or abraded to promote adhesion, after removing all form release agents and curing compounds.
Priming: Regal Select High Build Flat and Low Lustre Finishs are self priming on most properly prepared substrates, including: wood, fiber cement board, hardboard, nonferrous metals and cured masonry surfaces. On bare substrates two coats are required; previously painted surfaces can be finished with 1 or 2 coats. For Regal Select High Build Soft Gloss new surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary. For best hiding results, tint the primer to the approximate shade of the finish coat, especially when a significant color change is desired.
Application: Stir thoroughly before and during use. Apply one or two coats. For best results, use a premium nylon/polyester brush and/or a premium roller. Apply paint generously from unpainted area into wet area. This product can also be sprayed.
Reviews
