Woodluxe Wood Brightener & Neutralizer by Benjamin Moore - GALLON

*****FREE SHIPPING*****

Woodluxe Wood Brightener & Neutralizer - Revitalize and Restore Your Wood
Brighten and Neutralize Your Wood Surfaces with Ease

Woodluxe® Wood Brightener & Neutralizer is specially formulated to tackle tannin bleed in cedar and redwood, as well as rust stains on wood and concrete surfaces. This versatile product also neutralizes and brightens wood surfaces after using Woodluxe® Wood Restorer or Woodluxe® Wood Stain Remover, ensuring a pristine finish. Additionally, it effectively breaks the "mill glaze" on new wood, preparing it for staining or sealing.

Key Features:

• Restores Severely Weathered Wood: Ideal for rejuvenating old, weathered wood surfaces.
• Bleach-Free Formula: Gentle on wood, providing safe and effective brightening.
• Concentrated for Maximum Efficiency: Highly effective in small amounts.

Ideal Usage:

• Residential Applications: Perfect for home decking, siding, fencing, and outdoor furniture.
• Commercial Applications: Suitable for commercial properties requiring wood brightening and neutralizing.
• New or Stripped Wood Surfaces: Works on both newly installed and previously finished, stripped exterior wood surfaces.

Note: While Woodluxe Wood Brightener & Neutralizer removes stains from mold, mildew, fungus, and algae, it does not control these organisms.

Max Mixing Ratio (Water : Neutralizer) 8 : 1

Coverage at Max Dilution: 1,600 – 2,400 Sq. Ft

Surface Preparation: Project surfaces may be damp or dry. Do not apply if surface temperature is below 50 °F (10 °C). Protect adjacent surfaces; cover with plastic and/or tape off any areas not being stripped. Pre-wet and/or cover vegetation; rinsing residue will not harm plants or roots. Exposure to concentrate may burn foliage.

PRIOR TO APPLICATION: Determine proper dilution. Test a small, inconspicuous area and allow to dry before general use. Before and after application, liberally spray surrounding plants and vegetation with water. Avoid contact with metal, lawn furniture and fabric. If necessary, protect adjacent surfaces with plastic.

Application:

Mixing Recommendations: This container makes up to 9 gallons of product. Mix ½ gallon of Woodluxe® Wood Brightener and Neutralizer with 3 ½ gallons of water. For stubborn areas mix ½ gallon of Woodluxe® Wood Brightener and Neutralizer with 2 ½ gallons of water. When using through a power washer chemical injector, place intake tube directly into container

DO NOT MIX CLEANER IN METAL CONTAINERS. NEVER MIX OR USE WITH OTHER CLEANERS OR CHEMICALS.

1. Apply product liberally to surface with plastic garden sprayer, brush or power washer chemical injector.
2. Allow solution to stand for 10 – 30 minutes.
3. Agitate with stiff bristle brush in direction of wood grain and rinse using a garden hose with nozzle or power washer.
4. Allow to dry thoroughly.

Note: When applying to vertical surfaces, apply from bottom to top.

Limitations

• Do not apply when air and surface temperatures are below 50 °F (10 °C)

Compliance & Certifications

• OTC
• OTC II
• CARB
• CARB07
• CARB19
• UTAH
• AZMC
• SCAQMD