XIM UMA Primer
XIM

XIM UMA Spray Primer

$11.99

UMA’s Advanced Technology has both primer and adhesive-like properties.  A Quick Dry, White Bonding Primer/Sealer provides excellent adhesion. Interior or Exterior. Can be tinted. All topcoats. For Tough-To-Paint surfaces: Glass, Tile Formica, Metals, Many Plastics, Wood and other construction materials including Kynar® and Silicone Polyester pre-coated siding. Please refer to data sheet for more details.

Xim UMA Bonder is an ideal prime coat for:

  • Wood
  • Metals
  • Plaster
  • Hardboard
  • Most Plastics
  • Fiberglass
  • Formica
  • Tile
  • Porcelain
  • Glazed Block
  • Glass
  • Also recommended for priming Kynar and Silicone Polyester pre-coated siding.

Note: Because there are many types of surfaces, plastics and composite materials, always test a small area first for adhesion and topcoat compatibility before starting. When priming Kynar and Silicone Polyester pre-painted siding at least two test patches in different areas is a must to demonstrate adhesion that is acceptable to you. Not recommended for tubs, sinks or showers where continuous water or hot water contact occurs. Not recommended for use on polyethylene, polypropylene, Teflon or nylon.. Not recommended for below grade application. For extra corrosion protection on iron and steel use XIM 360 Rust Inhibiting Primer. On extremely porous surfaces or severe staining types of wood additional coats of UMA may be required. Certain staining agents, such as tannic acid or mineral salts from water may require XIM’s solvent based stain killers. Advanced Technology dries to touch in about 30 to 45 minutes and will reach full hardness in 7 to 10 days depending on temperature, humidity and film thickness. It can be nib sanded after about 3 hours and lightly sanded 24 hours after application. It can be used for indoor or outdoor applications and can be top coated with all top coats including latex, oil-alkyds, lacquers, urethanes and epoxies. Shelf life is 36 months, unopened at room temperature of 77 degrees F.

Features and Benefits: 

  • Excellent Wet Adhesion 
  • Low Odor 
  • Sandable 
  • Excellent Leveling 
  • Use With Industrial Grade Top Coats: Alkyds, Acrylics, Epoxies, Urethanes, Lacquers 
  • Sprayable With: Conventional Air, Airless, HVLP 
  • Soap & Water Clean-Up 
  • Non-Flammable 
  • Primes and Seals 
  • Helps Prevent Flaking, Blistering, Peeling 
  • Bonds Paint
Full Description
Qty
  • Description

    UMA’s Advanced Technology has both primer and adhesive-like properties.  A Quick Dry, White Bonding Primer/Sealer provides excellent adhesion. Interior or Exterior. Can be tinted. All topcoats. For Tough-To-Paint surfaces: Glass, Tile Formica, Metals, Many Plastics, Wood and other construction materials including Kynar® and Silicone Polyester pre-coated siding. Please refer to data sheet for more details.

    Xim UMA Bonder is an ideal prime coat for:

    • Wood
    • Metals
    • Plaster
    • Hardboard
    • Most Plastics
    • Fiberglass
    • Formica
    • Tile
    • Porcelain
    • Glazed Block
    • Glass
    • Also recommended for priming Kynar and Silicone Polyester pre-coated siding.

    Note: Because there are many types of surfaces, plastics and composite materials, always test a small area first for adhesion and topcoat compatibility before starting. When priming Kynar and Silicone Polyester pre-painted siding at least two test patches in different areas is a must to demonstrate adhesion that is acceptable to you. Not recommended for tubs, sinks or showers where continuous water or hot water contact occurs. Not recommended for use on polyethylene, polypropylene, Teflon or nylon.. Not recommended for below grade application. For extra corrosion protection on iron and steel use XIM 360 Rust Inhibiting Primer. On extremely porous surfaces or severe staining types of wood additional coats of UMA may be required. Certain staining agents, such as tannic acid or mineral salts from water may require XIM’s solvent based stain killers. Advanced Technology dries to touch in about 30 to 45 minutes and will reach full hardness in 7 to 10 days depending on temperature, humidity and film thickness. It can be nib sanded after about 3 hours and lightly sanded 24 hours after application. It can be used for indoor or outdoor applications and can be top coated with all top coats including latex, oil-alkyds, lacquers, urethanes and epoxies. Shelf life is 36 months, unopened at room temperature of 77 degrees F.

    Features and Benefits: 

    • Excellent Wet Adhesion 
    • Low Odor 
    • Sandable 
    • Excellent Leveling 
    • Use With Industrial Grade Top Coats: Alkyds, Acrylics, Epoxies, Urethanes, Lacquers 
    • Sprayable With: Conventional Air, Airless, HVLP 
    • Soap & Water Clean-Up 
    • Non-Flammable 
    • Primes and Seals 
    • Helps Prevent Flaking, Blistering, Peeling 
    • Bonds Paint
  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: XIM-UMA-SPRY
    Weight: 1.00 LBS
    Width: 3.00
    Height: 8.00
    Depth: 3.00