Product Overview
*****FREE SHIPPING*****
Elevate your project with Series 1070 Fluoronar, a top-tier high-solids fluoropolymer coating designed for optimum durability. Enjoy the luxury of user-friendly application methods—brush, roll, or conventional spray—without compromising on quality. With an ultra-durable finish and impeccable color and gloss retention, Series 1070 is the ultimate choice for even the most extreme conditions. It's not just a coating; it's a statement of resilience.
Restore the vitality of aged fluoropolymer coil applied coatings or add a premium touch to your OEM projects with Fluoronar. This exceptional film not only performs in the face of adversity but also thrives in areas susceptible to frequent moisture, standing water, or situational immersion on steel plates. It's time to elevate your projects with Fluoronar and experience the epitome of durability and performance.
This coating meets the rigorous exterior weathering requirements of AAMA 2604 and 2605, setting a new standard for excellence in protective coatings.
- Best in class color and gloss retention
- Brush, roll, or spray application
- Custom colors available
ATTENTION: All 1070 Flouronar is custom made to order, leads times are 1-2 weeks after ordering.
Coverage: 385-481 sq.ft. per gallon
Temperature resistance: (Dry) Continuous 250°F (121°C), Intermittent 275°F (135°C)
Dry Time:
- To touch: 30 minutes
- To handle: 4-6 hours
- To recoat: 6-8 hours
Pot Life: 2 hours @70 degrees, 1 hour @ 90 degrees
Mixing: Stir contents of the container marked Part A, making sure no pigment remains on the bottom. Add the contents of the can marked Part B to Part A while under agitation. Continue agitation until the two components are thoroughly mixed. Do not use mixed material beyond pot life limits. Caution: Part B is moisture-sensitive and will react with atmospheric moisture. Keep unused material tightly closed at all times.
Mixing Ratio: By volume: Five (Part A) to one (Part B)
Thinning: Thinning is required for proper application. For air spray, thin up to 5% or 1/4 pint (190 mL) per gallon with No. 63 Thinner. For roller, thin 5% to 8% per gallon with No. 63 Thinner. Caution: Do not add thinner if more than thirty (30) minutes have elapsed after mixing.
Application:
- Roller: Use 1/4” or 3/8" (6.4 mm or 9.5 mm) synthetic woven nap cover. Do not use medium or long nap roller covers.
- Brush: Use high quality natural or synthetic bristle brushes.
- Air Spray:
- Gun: DeVilbiss JGA
- Fluid Tip: E
- Air Cap: 704 or 765
- Air Hose ID: 5/16” or 3/8” (7.9 or 9.5 mm)
- Mat’l Hose ID: 3/8” or 1/2” (9.5 or 12.7mm)
- Atomizing Pressure: 75-90 psi (5.2-6.2 bar)
- Pot Pressure: 10-20 psi (0.7-1.4 bar)
- Low temperatures or longer hoses require higher pot pressure. Use appropriate tip/atomizing pressure for equipment, applicator technique and weather conditions.
Contact Tnemec Company for information on electrostatic application.
Reviews
