Product Overview
Benjamin Moore HP1320 Universal Metal Primer is a high-performance, one-component, quick-drying, rust-inhibitive primer formulated specifically for ferrous metal substrates such as steel and iron. Engineered for commercial, industrial, and facility maintenance applications, HP1320 provides excellent corrosion protection while creating a durable foundation for a wide variety of intermediate and finish coats.
Its phenolic alkyd formulation offers fast dry and recoat times, making it an excellent choice for production environments where minimizing downtime is critical. HP1320 may also be used as a tie coat over many existing coatings before applying high-performance finish systems.
Available in White, Red, and Gray, HP1320 delivers dependable corrosion protection for properly prepared steel surfaces in mild to moderately corrosive environments.
Key Features & Benefits:
- High-performance rust-inhibitive metal primer
- Designed specifically for ferrous metals including steel and iron
- One-component formula — no mixing required
- Fast 30-minute dry time
- Recoat in approximately 4 hours
- Excellent corrosion protection
- Outstanding adhesion to properly prepared steel
- Accepts most industrial intermediate and finish coats
- Can be used as a tie coat over many existing coatings
- Interior and exterior use
- Suitable for use in USDA-inspected facilities
- Available in White, Red, and Gray
Recommended Uses
- Structural steel
- Steel beams
- Steel doors and frames
- Railings
- Equipment
- Machinery
- Industrial maintenance
- Commercial facilities
- Manufacturing plants
- Warehouses
- Facility maintenance projects
Recommended For:
- Carbon steel
- Structural steel
- Iron
- Previously coated ferrous metals
Not Recommended For:
- Galvanized steel
- Aluminum
- Stainless steel
- Other non-ferrous metals
- Immersion service
Coverage: 350-450sq.ft. per gallon
Dry Times:
- To Touch: 30 minutes
- To Recoat: 4 hours
Surface Preparation: All grease, oil, dirt, mildew, or any other surface contaminants must be removed using HP6000 Oil & Grease Emulsifier or SSPC-SP1 solvent cleaning.
- Ferrous Metal: All loose rust and mill scale should be removed prior to applying this product. A minimum of SSPC-SP6 Commercial Blast or abrasive blasting isrecommended for severe environmental exposures. Small areas may be cleaned in accordance with SSPC-SP2 Hand Tool Cleaning or SSPC-SP3 Power Tool Cleaning or SSPCSP13 Power Tool Cleaning to bare metal. Tightly adhering rust may be coated over provided the surface.
-
Previously Painted Surfaces: Clean using HP6000 Oil & Grease Emulsifier or solvent washed as outlined above. Dull glossy surfaces by sanding. Remove all loose, flaking or peeling paint prior to application.
Application: Mix the product thoroughly before application. The use of a drill mixer at low speed will best accomplish this. Do not thin
- Spray, Airless: Pressure / 1,500 – 2,200 PSI, Tip / 0.013 – 0.017
- Air Spray (Pressure Pot): 704 or 765 air cap and Fluid Tip E
- Can be brushed using a natural bristle brush or rolled using a 3/8” lambs wool or 1/4” – 1/2” synthetic roller cover
Reviews
