INSL-X Stix Bonding Primer SXA-110
Insl-X Products

INSL-X Stix Acrylic Bonding Primer by Benjamin Moore

$29.99

*****FREE SHIPPING*****

Stix Waterborne Bonding Primer is a premium quality, waterborne, acrylic urethane primer/sealer with unparalleled adhesion to the most challenging surfaces, including PVC, Vinyl, Most Plastics, Glass, Tile, Glazed Block, Glossy Paints, Pre-Coated Siding, Fiberglass, and Galvanized Metals. Stix is also ideal for use on plaster, drywall, wood, and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. Offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer Finishes. Stix levels to a smooth surface and cleans up with soap and water.

  • Bonds to "hard-to-coat" surfaces
  • Cures in temperatures as low as 35° F (1.57° C)
  • Creates an extremely hard film
  • Excellent enamel holdout
  • Can be top coated with almost any product
  • Low odor

Coverage: 300-400sq.ft. per gallon

Dry Times:

  • Tack Free: 1/2 hour
  • Recoat: 3-4 hours
  • Full Cure: 3-4 Days

Recommended For: Interior and Exterior surfaces. Drywall, Plaster, Ceiling, Acoustical Tile, Wood Trim & Doors, Formica, Ceramic Tiles, Glossy Surfaces, PVC, Most Plastics, Masonry Walls, Wood, Trim, Shutters, Masonry, Stucco, Concrete, Cement Block, Galvanized Metal, Aluminum, etc.

Limitations: Apply when air and surface temperatures are above 35 °F. Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing. Not intended for immersion service or continuous water contact. Not for below grade applications. Not recommended for use over polyethylene or polypropylene. Stix must be top coated for exterior use. Not recommended over Kynar (and similar finishes) unless tested and approved by the buyer. Not recommended as a whole house exterior primer over wood.

Certifications & Qualifications:

  • VOC compliant in all regulated areas
  • Qualifies for LEED® v4 Credit
  • Qualifies for CHPS low emitting credit (Collaborative for High Performance Schools)
  • CDPH v1 Emission Certified Available Colors: White

Cleanup: Warm soapy water

Resin Type: Acrylic Urethane

Recommended Use: Interior or exterior

MPI Rating: N/A

VOC Level: < 50 g/L

See brochure here.

Full Description
Size *
For more uniform finish coat coverage, we recommend tinting the primer towards the finish coat color? Would you like us to tint this primer for you? If yes, indicate color below. *
Qty
  • Description

    *****FREE SHIPPING*****

    Stix Waterborne Bonding Primer is a premium quality, waterborne, acrylic urethane primer/sealer with unparalleled adhesion to the most challenging surfaces, including PVC, Vinyl, Most Plastics, Glass, Tile, Glazed Block, Glossy Paints, Pre-Coated Siding, Fiberglass, and Galvanized Metals. Stix is also ideal for use on plaster, drywall, wood, and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. Offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer Finishes. Stix levels to a smooth surface and cleans up with soap and water.

    • Bonds to "hard-to-coat" surfaces
    • Cures in temperatures as low as 35° F (1.57° C)
    • Creates an extremely hard film
    • Excellent enamel holdout
    • Can be top coated with almost any product
    • Low odor

    Coverage: 300-400sq.ft. per gallon

    Dry Times:

    • Tack Free: 1/2 hour
    • Recoat: 3-4 hours
    • Full Cure: 3-4 Days

    Recommended For: Interior and Exterior surfaces. Drywall, Plaster, Ceiling, Acoustical Tile, Wood Trim & Doors, Formica, Ceramic Tiles, Glossy Surfaces, PVC, Most Plastics, Masonry Walls, Wood, Trim, Shutters, Masonry, Stucco, Concrete, Cement Block, Galvanized Metal, Aluminum, etc.

    Limitations: Apply when air and surface temperatures are above 35 °F. Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing. Not intended for immersion service or continuous water contact. Not for below grade applications. Not recommended for use over polyethylene or polypropylene. Stix must be top coated for exterior use. Not recommended over Kynar (and similar finishes) unless tested and approved by the buyer. Not recommended as a whole house exterior primer over wood.

    Certifications & Qualifications:

    • VOC compliant in all regulated areas
    • Qualifies for LEED® v4 Credit
    • Qualifies for CHPS low emitting credit (Collaborative for High Performance Schools)
    • CDPH v1 Emission Certified Available Colors: White

    Cleanup: Warm soapy water

    Resin Type: Acrylic Urethane

    Recommended Use: Interior or exterior

    MPI Rating: N/A

    VOC Level: < 50 g/L

    See brochure here.

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    Weight: 11.00 LBS
    Width: 7.00
    Height: 8.00
    Depth: 7.00