Product Overview
*****FREE SHIPPING*****
GacoPatch is a flashing grade, standalone silicone roof patch designed to provide a long lasting solution for a leaking roof. The convenient wide top pail makes GacoPatch application easy to do with a trowel or a brush. GacoPatch is a one step application which eliminates the cost of additional products such as primers, seam tapes or top coats.
NOTE: SAUSAGE PACKS HAVE BEEN DISCONTINUED BY THE MANUFACTURER.
New and improved technology allows for GacoPatch to be the long term solution for roof repairs. It does not contain asphalts or acrylics and it is extremely durable. GacoPatch remains permanently flexible even under permanent ponding water. It is UV stable and will not chalk, crack or peel. No reinforcements or extra steps are required for horizontal patches, even over 1/2″ thick, because GacoPatch resists degradation over time and will not become brittle or break down.
- ONE STEP APPLICATION. No primer required. GacoPatch is ideal for quick repair as a stand-alone product.
- UV STABLE. Resists degradation – will not chalk, crack or peel.
- FLASHING GRADE. Apply GacoPatch with a trowel on vertical or horizontal applications, even over ½” thick.
- Fiber Reinforced Silicone Roof Patch
- Can Be Applied to Damp Surfaces
- One Step Application
FOR USE ON:
- Cracks
- Expansion Joints
- Flashings
- Gutters
- Penetrations
- Pipes
- Pitch Pans
- Seams
- Small Holes
- Transitions
- Vents
- Voids
APPLICATION: GacoPatch can be applied to a damp surface, but any standing or ponding water should be removed. Apply by brush, roller, trowel or putty knife as received. For cold weather application, keep material stored above 65°F (18°C). Do not apply to substrates with temperatures below freezing or above 120°F (49°C).
COVERAGE: Apply GacoPatch at a minimum thickness of 1/8" and spread at least 3" in all directions of application area for an approximate coverage rate of 50 sq. ft. per gallon.
THINNING: Product should not be thinned.
PRIMING: No primer necessary.
DRY TIME: At 1/2" thick, in 75°F (24°C) temperatures and 55% relative humidity, GacoPatch will be tack-free in 1 hour, fully cured in 40 hours, but can be rained on within 30 minutes. Product is moisture cure; low humidity will result in longer dry times.
APPLICATION OF TOPCOATS: GacoPatch is UV stable. No top coat is required. It is not intended to be painted or covered over with any product other than Gaco Silicone Roof Coatings.
CLEAN-UP: Application tools and equipment can be cleaned with GacoFlex Silicone Solvent or 100% Pure Mineral Spirits. DO NOT USE WATER OR RECLAIMED SOLVENTS.
Reviews
