TuffCrete® WB Acrylic Waterproofing Concrete Stain is a water reduced coating designed for interior or exterior masonry surfaces. It may be applied in one coat as a stain, or in two coats as an opaque finish. An ideal choice for either vertical or horizontal masonry surfaces. This product is available in clear, white, ready mixed colors, and a full range of tinting bases. Not for immersion service.
- Waterborne acrylic formula
- Non Fading
- Fast Drying
- Rugged, durable finish
- Resists detergents, oils, grease &scrubbing
- For interior or exterior masonry surfaces
Coverage: 400-500sq.ft. per gallon
- Tack Free: 30 minutes
- Recoat: 4 hours
- Light Foot Traffic: 24 hours
- Heavy Fott Traffic: 72 hours
Recommended For: TuffCrete 100% Acrylic WB Concrete Stain forms a tough, durable film on most interior or exterior masonry surfaces. It may be applied to concrete walls, balconies, patios, pool decks, basement floors, or concrete columns. Apply one coat for a stain look and two coats as an opaque finish.
Limitations: Do not apply in direct sunlight or on hot surfaces. Do not apply if the surface or ambient temperature is below 50 °F (10 °C) or more than 90 °F (32.2 °C). NOT RECOMMENDED for driveways, garage floors, heavy industrial floor applications, exterior wood surfaces or for other surfaces that will be exposed to vehicular traffic.
Available Sheens: Satin
Available Colors: Clear, White, Neutral Base, Deep Base, Gray Pearl, Light Gray, Tile Red, Pine Green, Desert Sand, and Saddle Brown
Cleanup: Soap and water
Resin Type: Acrylic
Recommended Use: Interior or exterior
MPI Rating: 58, 99
VOC Level: 94 Grams/Liter or .78 Lbs./Gallon
Be the first to
Leave a Review
DetailsCurrent Stock:SKU: CST-2110-01UPC: 090548243502Weight: 10.00 LBSWidth: 7.00Height: 8.00Depth: 7.00