Product Overview
*****FREE SHIPPING*****
Seal-Krete Original Vertical Waterproofing is the ultimate solution for protecting your vertical surfaces from water damage. This waterproofing paint is specifically formulated to provide a durable, water-resistant barrier that keeps water out and prevents leaks. It is perfect for use on foundations, walls, and other vertical surfaces, and can be applied to concrete, masonry, and other porous surfaces. With its easy-to-use brush, roll, or spray application, Seal-Krete Original Vertical Waterproofing is quick and simple to apply. It dries to a tough, flexible finish that resists cracking, peeling, and fading, making it ideal for both residential and commercial use. Protect your vertical surfaces with Seal-Krete Original Vertical Waterproofing.
- Protects New or Painted Masonry
- Revitalizes Color, Non-Yellowing
- Resists Mold & Mildew Growth
- Binds Chalky Surfaces
- Strengthens Mortar Joints
- Seals Painted Metal
- Rejuvenates Faded Vinyl
TYPICAL USES
- Seal brick, stucco & concrete
- Rejuvenate old brick & plaster
- Brighten aluminum siding
- Prime vinyl siding
- Bind chalky surfaces
- Buffer pH in hot cement
- Paint additive to extend life & coverage
- Dustproofing and priming floors
SURFACE PREP: Surface must be clean and dry. Remove loose paint and excessive chalk. Repair cracks and surface breaks. Cover windows, doors, etc. and use caution when applying on windy days.
APPLICATION: Read “LIMITATIONS” section before use. This sealer is ready to use; do not dilute. Apply with a brush, roller or sprayer (garden or airless). Backroll spray applications to ensure penetration. Apply at least two
coats, allowing two hours dry time between coats. Remove any overspray immediately with water. Note: Sealer goes on milky white but dries clear.
COVERAGE: 80–300 sq.ft. per gal., depending on surface porosity. Second coat application is 50% greater. Two coats are required for waterproofing bare, vertical concrete.
COVERAGE GUIDELINES - Material Coverage Approx. sq.ft./gal.
- Stucco/Simulated Brick - 150sq.ft./gal
- Concrete Slab/Tilt-ups - 175sq.ft./gal
- Concrete Blocks - 80sq.ft./gal
- Brick - 125sq.ft./gal
- Wood Fencing - 175sq.ft./gal
- Aluminum Siding - 300sq.ft./gal
- Galvanized Metal - 300sq.ft./gal
- Adobe - 100sq.ft./gal
- Chalky Surfaces - 300sq.ft./gal
DRY TIME: 2–4 hours, depending on temperature and humidity.
TOPCOATING: May be topcoated with latex, oil-based or elastomeric coating when dry.
PAINT ADDITIVE: 4–8 oz. of SEAL-KRETE Original can be mixed with one gallon of latex paint to improve spread rate.
LIMITATIONS: Use on above grade vertical surfaces or as a primer on horizontal surfaces – not for below grade use. Do not apply if rain is expected within 12 hours or if temperatures fall below 50°F within 24 hours of application. Do not use on swimming pools, bird baths, water features, cedar, redwood or in areas where hydrostatic pressure is likely to develop. Do not use on very porous substrates like low density, decorative block (use SEALKRETE Heavy-Duty instead).
Reviews
