INSL-X Tough Shield floor & patio coating

Insl-X Products

INSL-X Tough Shield – Rugged Acrylic Floor & Patio Coating for Residential & Light Commercial by Benjamin Moore

(2 reviews) Write a Review
$59.98 - $269.98
Weight:
11.00 LBS
Bulk Pricing:
Buy in bulk and save

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 - 4 and get 3% off
  • Buy 5 or above and get 5% off
Selected Color is
Adding to cart… The item has been added

Product Overview

*****FREE SHIPPING*****

INSL-X Tough Shield is a water based, 100% acrylic enamel specifically designed for floors, patios, steps, porches, walkways and other horizontal surfaces in both residential and light commercial environments. It delivers a durable satin finish, excellent adhesion, abrasion resistance, and can withstand detergents, oils, grease, scrubbing and even ponding water. Ideal for surfaces of properly prepared concrete, masonry, metal or wood, Tough Shield is engineered for high-performance durability and ease of maintenance.

KEY FEATURES:

  • 100% acrylic formula for rugged performance
  • Durable satin finish stands up to weather and abrasion
  • Resists ponding water, oils, grease, scrubbing
  • Suitable for interior or exterior use in residential & light commercial applications
  • Easy cleanup with warm soapy water

RECOMMENDED USES:

  • Patios and porches
  • Walkways, steps
  • Light commercial floor surfaces
  • Properly prepared concrete, masonry, metal or wood
  • Note: Not designed for garage floors or heavy vehicular traffic use.

COLORS: White, Black, Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, and custom colors.  5 GALLON PAILS ARE ONLY AVAILABLE FROM THE MANUFACTURER IN WELDED GRAY. 

COMPLIANCE & CERTIFICATIONS

  • OTC
  • OTC II
  • CARB
  • CARB07
  • CARB19
  • UTAH
  • AZMC
  • SCAQMD

COVERAGE: 400-500sq.ft. per gallon

SHEEN: Satin

DRY TIMES:

  • Tack Free: 1-2 hours
  • Recoat: 4-6 hours
  • Light Foot Traffic: 24 hours
  • Heavy Foot Traffic: 5-7 days

SURFACE PREPARATION: Surface to be painted must be clean and free of dirt, chalk, wax, grease, rust or flaking paint. Dirt and chalk should be removed by power washing or scrubbing with warm soapy water and thoroughly rinsed with clean water. Wax should be removed with a commercial wax stripper or by solvent cleaning. Grease should be cleaned by using an Oil & Grease Emulsifier. Rust must be removed by hand sanding vigorously or by conscientious power tool cleaning. Remove loose paint by scraping. Feather sand rough edges to ensure a smooth finish coat. Glossy surfaces must be dulled by lightly sanding. Remove sanding dust before paint application. Any exposed substrate should be spot primed with the appropriate primer. 

NOTE: New concrete should cure 30 days prior to painting and should be thoroughly acid etched to a texture of medium sandpaper.

PRIMING: 

  • Bare Concrete: Self Priming. Thin first coat of Tough Shield® with one pint of water per gallon.
  • Wood Floors: Use an acrylic primer or an alkyd primer/sealer
  • Masonry: Use Acrylic Masonry Sealer
  • Ferrous Metal: Use Metal Primer
  • Galvanized Metal: Self Priming

APPLICATION: Stir product with a circular, lifting motion before you begin to paint. Tough Shield® Porch & Floor Coating may be applied by brush, roller or spray techniques, at a rate of application not to exceed 500 square feet per gallon. On bare concrete, thin first coat with one pint of water per gallon. Surface texture and porosity will affect actual yield. Allow 24 hours cure time prior to light foot traffic and 5 – 7 days prior to heavy use. Apply when surface temperature is above 50 °F. This product is not designed as a slip resistant finish. If skid resistance is important, apply Insl-X® Sure Step Anti-Slip Coating.

  • Brush: Nylon / polyester
  • Roller: Professional/High-Capacity Quality
  • Spray, Airless:
    • Pressure / 1,500 – 2,500 PSI
    • Tip / 0.013 – 0.017

LIMITATIONS:

  • Do not paint when air or surface temperature is below 50 °F (10 °C).
  • Do not apply if temperature is within 5° of dew point or if rain is expected within 12 hours.
  • Do not use on garage floors or car parking surfaces.

 

Related Products